CAD-CUT Metallic - Gold
Thickness: 63 microns
Important: Once handled or laundered the material takes on a brushed metallic look.
Materials to Use On:
-Apply design at 285°F / 140°C
-Use medium pressure for 8-10 seconds
-Peel carrier cold
-Cut your design with the pattern side facing down on your mat. MIRROR your image.
-Weed your sheet
-Apply to your blank!
-Wait 24 hours before first wash
-Machine wash warm or cold with mild detergent
-Do not bleach or dry clean
-Dry on normal dryer setting