CAD-CUT® Glitter Flake™ Heat Transfer Vinyl- Dark Green

Materials to Use On:
-100% Cotton
-100% Polyester
-Poly/Cotton Blends

Application to Natural Fibers:
-Apply design at 302°F / 150°C
-Use medium pressure for 10-12 seconds 
-Peel carrier hot

Application to Synthetic Fibers:
-Apply design at 290°F / 143°C
-Use medium pressure for 10-12 seconds 
-Peel carrier hot

Cutting Instructions:
-Cut your design with the pattern side facing down on your mat. MIRROR your image.
-Weed your sheet
-Apply to your blank!

Care Instructions:
-Wait 24 hours before first wash
-Machine wash warm or cold with mild detergent
-Do not bleach or dry clean
-Dry on normal dryer setting