CAD-CUT® Premium Plus™

With superior stretch and rebound, this low-temp HTV is a great choice for application to performance wear. It can be applied at temperatures as low as 280°, meaning heat-sensitive fabrics like spandex can be decorated without fear of scorching.

Applies at a low temp to prevent scorching
Soft and stretchable
Silky matte finish
Choose low tack for larger designs, high tack for more detailed designs
High tack peels hot for quick production and no distortion of design on stretchy fabrics

Material Specifications

Composition: Polyurethane (PU)
Carrier: Frosted, Pressure-Sensitive
Low Tack Thickness: 80-108 microns/.080-108mm
High Tack Thickness: 92 microns/.092mm
Stretch & Rebound: 5
Washability: 50
Safety: CPSIA Certified
Laser cutter compatible

Material/Fabric Compatibility

100% Cotton
100% Polyester
100% Preshrunk Cotton
Cotton/Poly Blends
Lycra®/Spandex Blends

High Tack Application Instructions

Time:8-12 Seconds

Temp:280-300°F/138-149°C

Pressure:Medium

Peel:Hot

Two-Color5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds

Heated Lower Platen Application - 100% Polyester

Lower Platen:320°F

Upper Platen:270°F

Time:10 seconds (depending on thickness of garment)

Pressure:60 psi (#6/Medium on Hotronix machines)

Peel:Warm for Low Tack; Hot for High Tack

Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.

Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends

Lower Platen:290°F

Upper Platen:270°F

Time:30 secs

Pressure:60 psi (#6/Medium on Hotronix®)

Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

16 products

Sort